XSW-D LAVALIER SET
XS Wireless Digital 소형 마이크 세트. ME2-II 클립 온 소형 마이크, XSW-D 3.5mm(1/8") 송신기, XSW-D XLR 수신기(male), 벨트 클립 및 USB-A to USB-C 충전 케이블을 갖춘 사용이 간편한 원터치 방식의 무선 오디오 세트

XSW-D LAVALIER SET
제품 번호 508485

Buy now from your favorite online store!

디지털 송신을 활용하여 원활하게 오디오 소스에 연결하는 사용이 간편한 원터치 방식의 무선 오디오 세트. ME2-II 소형 마이크를 갖춘 고급스러운 이 무선 오디오 세트는 그 어느 때보다 손쉽게 무선 프레젠테이션을 진행할 수 있게 지원하면서 안정적인 연결 상태를 유지합니다.

  • 사용이 간편한 원터치 방식

  • 전 세계에서 작동 가능한 2.4GHz 디지털 송신

  • 최적의 조건에서 75m 범위(250ft)

  • 한 번 충전으로 최대 5시간 지속되는 배터리 수명

  • 하나의 수신기에 연결된 여러 송신기 간 전환

  • 송신기 및 수신기의 모든 조합 구성

  • 송신기 또는 수신기에서 음소거 지원

케이블 없이 뛰어난 연결

기본적으로 케이블 없이 XS Wireless Digital은 2.4GHz 전송으로 무선 연결이 가능합니다. 송신기를 다이내믹 XLR 보컬 마이크에 연결하고 수신기를 믹서 또는 액티브 PA 스피커에 꽂기만 하면 됩니다. 초록색 불이 켜지면 바로 사용할 수 있습니다. 무대 위를 돌아다니는 뮤지션을 위한 자유로운 솔루션이 되기도 하고, 리허설 룸에서 편리하게 사용할 수도 있는 이 무선 시스템으로 퍼포먼스에만 집중하면서 잠재된 창의성을 마음껏 발휘해 보십시오.

케이블 없이 뛰어난 연결

간단한 조작

XS Wireless Digital의 송신기와 수신기에는 하나의 버튼만 있습니다. 이 버튼을 누르면 전원이 켜지면서 바로 연결이 되며, 한 번 클릭하면 음소거가 되고, 길게 누르면 전원이 꺼집니다. 또한, LED가 있어서 안정적으로 연결이 되었는지, 또는 배터리를 충전할 때가 되었는지를 표시해줍니다. 복잡한 메뉴도 없고 설치도 걱정할 필요가 업습니다. 케이블은 없으나, 케이블 연결하는 것만큼이나 간단합니다.

간단한 조작

전 세계에서 사용 가능한 디지털

XS Wireless Digital은 전 세계에서 라이선스가 없는 WiFi와 동일한 2.4GHz 주파수를 사용합니다. 시스템이 자동으로 주파수를 검색하기 때문에 사용 가능한 주파수를 스캔할 필요도 없습니다. 정적 간섭이나 드롭아웃에 대한 걱정 없이 어디를 가든 XSW-D를 휴대하고 사용할 수 있습니다. 전원을 켜고 프리젠테이션을 시작해 보십시오.

전 세계에서 사용 가능한 디지털


Fan Images
상품평
Be the first to write a review.

Specifications
구성품
  • ME2-II 클립 온 소형 마이크
  • XSW-D 3.5mm(1/8") 송신기
  • XSW-D XLR 수신기(male)
  • 벨트 클립
  • USB-A to USB-C 충전 케이블

Training





Support
연락처
Product Support Phone

Product Phone


FAQ
  • How do I set up XS Wireless Digital for the first time?
    XS Wireless Digital systems come pre-paired from the factory, so you can take a new system out of the box, power it up and get right to work

  • How do I select a channel / frequency?
    XS Wireless Digital automatically selects its own frequency, and will automatically switch to a new frequency if interference is detected

  • How many systems can I run simultaneously?
    Up to five (5) systems can be used simultaneously.

  • How far can XS Wireless Digital transmit?
    Up to 75m (250 ft) under ideal operating conditions.

  • Will XS Wireless Digital warn me if I'm getting out of range?
    Yes. Both transmitter and receiver indicators will flash green and red to indicate you're almost out of range.

  • What is XS Wireless Digital's operating time?
    XS Wireless Digital provides up to 5 hours of operating time.

  • How do I re-charge my system's batteries?
    XS Wireless Digital's built-in lithium ion batteries can be charged by connecting the included charging cable to any USB-A equipped external charging device or computer.

  • Do I need to set my system's input and output levels?
    No, input and output levels have been pre-set to optimum levels - simply plug and play.

  • What do the different indicator colors mean when I power up my system?
    Battery status is indicated by color during power up.
    • Green: over 75% charge remaining
    • Yellow: less than 75% charge remaining
    • Red: less than 5% remaining
    • Blinking red: too low to operate


  • How do I monitor my remaining battery time during use?
    During operation, remaining battery time is shown on the indicator as follows:
    • Red & green blinking: less than 15% charge remaining
    • Rapid blinking, red only: less than 5% remaining


  • Can I buy additional components with different connectors to expand my system?
    Yes, you can purchase additional transmitters or receivers - sold separately - and then pair them to work with your existing system.

  • How do I pair an additional component to my existing system?
    Start with both devices powered off. Press and hold the power buttons on selected transmitter and receiver for (minimum of) 5 seconds to enable pairing on the devices.  Both indicators will flash green and red, then turn solid green when pairing is complete.

  • How many transmitters can I pair with my receiver?
    Up to four transmitters can be paired with a receiver. Note, only one transmitter may be used at a time.

  • Can I send audio from one transmitter to multiple receivers simultaneously?
    No, XS Wireless Digital creates a point-to-point paired connection between a single transmitter and single receiver.

  • The Portable ENG Set comes with two transmitters and one receiver. Can I use both transmitters simultaneously?
    No, only one transmitter can be connected to the receiver at a time. Both transmitters have been pre-paired to the receiver from the factory, enabling plug and play operation with either device.

  • Do I need a license to use this system?
    No, XS Wireless Digital operates in the 2.4GHz frequency range for worldwide license-free use.

  • I lost an accessory. Can I replace it?
    Yes, all XS Wireless Digital accessories are available separately. You can purchase additional transmitters and receivers, belt clips, camera adapters, and connecting cables as needed.

  • What kind of microphones can be used with the XLR plug-on transmitter?
    Any dynamic microphone (or battery-powered condenser microphone) will work with the XLR plug-on.

  • What kind of microphones can be used with the 3.5mm Mini Jack transmitter?
    The 3.5mm Mini Jack transmitter is compatible with most common lapel mics and headmics.

  • Will the Instrument Set work with all styles of guitar and bass pick-ups and plug-styles?
    The 6.3mm (1/4 inch) jack connector has a 90-degree range of motion, allowing it to be plugged into a wide range of instruments with side, top or even recessed input jacks.  In the event that the transmitter does not fit into a specific instrument, an extension cable is provided, which allows the transmitter to be clipped to the strap.

  • Can I use the Ci1 instrument cable with the 3.5mm input on the Mini Jack Transmitter?
    No, the Ci1 instrument cable (included in analog XS Wireless and evolution wireless instrument sets) is not compatible with XS Wireless Digital. For instrument connections via 6.3mm (1/4 inch) jack, please use the dedicated instrument transmitter.

  • Can I connect XS Wireless Digital to my computer via the USB cable?
    XS Wireless components can be charged via a computer's USB port, but audio is not passed to or from a computer via USB.

  • My audio is distorted, what should I do?
    In the unlikely event that your audio distorts, reduce the input level on your mixing board, DSLR camera or other external device. If your equipment offers choice of mic or line level, please select line. For devices offering mic level only, reducing input sensitivity will improve results.  XS Wireless Digital has been designed to provide a clean, robust output signal, but you may need to adjust your external device the default settings on to achieve the best results.

다운로드

  • 리튬-이온 배터리 운반 정보
    • Transport information for Lithium-Ion batteries (540 KB) Download

      Revision Date: 2020-02-09 Revision Number: 1.0

  • 퀵 가이드
    • Quick Guide XS Wireless Digital (1.3 MB) Download

  • 사용 설명서
    • Instruction manual XS Wireless Digital (HTML) Download

      Interactive instruction manual for all products of the Sennheiser XS Wireless Digital series.

  • 기술 자료
    • Product Specification XS Wireless Digital Lavalier Set (210 KB) Download

  • EU Declaration of Conformity
    • EU Declaration of Conformity XS Wireless Digital (1.1 MB) Download

  • 안전 지침 및 규정 정보
    • Safety instructions, specifications and manufacturer declarations - XSW-D series (760 KB) Download

    • Specifications and manufacturer declarations - XSW-D Pedalboard Receiver (550 KB) Download


  • 유사 제품