XSW 1-825 / XSW 1-835
제품 선택하기
사운드를 뚫고 나오는 강렬한 보이스 사용이 간단한 보컬 및 프레젠터용 올인원 무선 시스템
380,000
무료 배송.

사운드를 뚫고 나오는 강렬한 보이스 UHF 대역에서 최대 10개의 호환 가능한 채널을 제공하는 XS WIRLESS 1을 통해 안정적인 무선 전송을 경험해 보십시오. XS WIRELESS 1 보컬 세트는 가수와 프레젠터용의 올인원 무선 시스템으로 사용이 간단하며, 젠하이저의 에볼루션 마이크 캡슐 e825(다이내믹, 카디오이드)가 포함되어 실감나는 라이브 사운드를 제공합니다. 이 세트에는 신속한 설치와 설정이 가능한 직관적인 고정 수신기, 보컬 마이크, 그리고 마이크 클램프가 포함됩니다.

  • 명성 높은 젠하이저의 에볼루션 마이크 캡슐로 전달되는 탁월한 라이브 사운드

  • 안테나-스위칭 다이버시티 수신

  • 안테나 통합

  • 원격 채널을 통한 자동 주파수 관리 및 동기화로 간단하게 설정 가능

  • 대규모 대역폭 내에서 UHF 주파수 선택 가능

  • 최대 10개의 호환 가능한 채널

편리한 자동 주파수 관리 기능

XS Wireless 1은 장비에 신경쓰지 않고 쇼에 더 집중하고 싶은 사용자를 위해 개발되었습니다. XSW 1의 전원을 켜기만 하면 자동 주파수 관리 기능이 나머지 작업을 수행합니다. 최적의 환경에서는 주파수 검색이나 간섭에 대해 걱정할 필요없이 최대 10대까지 동시에 무선으로 연결하고 작동시킬 수 있습니다.

편리한 자동 주파수 관리 기능

825 또는 835, 그것이 문제라면…

XS Wireless 1을 선택한 후, 어떤 캡슐을 사용할지 고민이 될 수 있습니다. 대부분의 경우 825는 보컬 마이크에 필요한 모든 것, 즉 내구성이 강한 디자인으로 고품질 사운드를 제공합니다. 825는 일반적인 스피치에 이상적이지만, 더 정교한 믹스를 원하는 보컬리스트에게는 835가 좋습니다. 835는 3kHz–5kHz의 부드러운 부스트 기능으로 보컬의 존재감을 높이고 최대 12kHz까지 강화된 주파수를 제공하여 목소리를 더욱 선명하게 해줍니다.

825 또는 835, 그것이 문제라면…

Pro Talk Video Series

Pro Talk Video Series

World-renowned Sound Engineers sharing tips, tricks and stories.
Subscribe and do not miss any episode of our Pro Talk Video Series
on YouTube! more

Newsletter subscription

상품평
Be the first to write a review.

Specifications
구성품
  • EM-XSW 1 수신기 1 대
  • 핸드헬드 송신기 SKM 825-XSW 1대
  • MZQ 1 마이크 클램프 1 대
  • NT 12-5 CW 전원 공급장치 1대
  • AA 건전지 2개
악세서리

Support
연락처
Product Support Phone

Product Phone


FAQ
  • How do I find a frequency (ie: perform a frequency scan)?

    To perform a frequency scan on the XS Wireless products follow these steps:

    1) Press the "UP" or "DOWN" button to scroll through the menu options on the receiver.

    2) Press the "SET" button to select the SCAN option. NOTE: The unit automatically selects the next available unused frequency. 

    Once the new frequency is selected on the receiver the transmitter needs to by synced to the receiver. To do this follow these steps:

    1) Press and hold the "SYNC" button on the transmitter until the "SYNC" symbol flashes on the receiver.

    2) Press the "SYNC" button on the receiver.

    NOTE: If a frequency SCAN is performed and no available frequencies are found then the SQUELCH setting will need to be increased. Once the SQUELCH setting has been increased repeat the steps of the frequency scan and then SYNC accordingly.



  • What adjustments can I do to improve sound quality?

    There are two settings that have the greatest effect on sound quality:

    MICROPHONE SENSITIVITY
    This is how sensitivity the microphone pick up is and this is adjusted on the microphone/body pack itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Adjusting closer to 0 dB is will be more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  It is suitable to adjust the level so that the AF peak indicator lights up only briefly during the loudest passages.

    AF OUTPUT
    This is how strong the signal is exiting out of the receiver into the sound board/speakers/etc. Typically this will be set to 0 dB or +6 dB if connected to equipment which is expecting a line level input . If you are connected to equipment expecting a mic level input you will typically need to drop this AF output down to -24 dB or -30 dB.  If your equipment has the option, it is best to try to run the equipment in line level mode.

    NOTE: If the AF Output is too high it may over load the input on any connected equipment (sound board/speakers/etc) and may create noise in the form of distortion/rumbling.



  • Why is there no audio coming from the microphone?

    Not having audio coming from a microphone could be caused by a few different scenarios.
    Firstly check that the transmitter and receiver are both on the same frequency as this is key to the system working.
    Next check to make sure that the "MUTE" switch is not accidentally engaged (either fully or partially). The best way to do this is click the mute switch on and then back off.
    After checking the "MUTE" switch if no audio is present make sure that the microphone element is securely in place. If using a body pack transmitter make sure that the microphone or guitar cable is securely in place by disconnecting it and reconnecting it. NOTE: On the handheld microphone the capsule is locked into place and cannot come loose.
    If you are seeing RF and AF levels on the receiver but do not have any sound through your system it would be recommended to check the cables between the receiver and sound system, check the inputs on the sound system and check the AF out level on the receiver to ensure that it is set to the appropriate level for your sound system.



다운로드

  • Frequency Sheets
    • Frequency Sheet XS Wireless 1&2 K range (925 - 937.5 MHz) (190 KB) Download

    • Frequency Sheet XS Wireless 1&2 A range (548 - 572 MHz) (170 KB) Download

    • Frequency Sheet XS Wireless 1&2 B range (614 - 638 MHz) (170 KB) Download

    • Frequency Sheet XS Wireless 1&2 C range (766 - 790 MHz) (160 KB) Download

    • Frequency Sheet XS Wireless 1&2 D range (794 - 806 MHz) (170 KB) Download

    • Frequency Sheet XS Wireless 1&2 E range (821 - 832 / 863 - 865 MHz) (170 KB) Download

    • Frequency Sheet XS Wireless 1&2 GB range (606 - 630 MHz) (210 KB) Download

    • Frequency Sheet XS Wireless 1&2 JB range (806.125 – 809.750 MHz) (160 KB) Download

    • Frequency Sheet XS Wireless 1&2 BC range (670 – 694 MHz) (170 KB) Download

  • Technical Data
    • 기술 데이터 XS Wireless 1 (2.2 MB) Download

  • 퀵 가이드
    • 요약 안내서 XS Wireless 1 (3.5 MB) Download

  • EU Declaration of Conformity
    • EU Declaration of Conformity XS Wireless 1 / XS Wireless 2 series (130 KB) Download

  • 사용 설명서
    • Instruction manual - XS Wireless 1 & XS Wireless 2 Download