SKM 5200-II
제품 선택하기
세계 수준의 마이크 SKM 5200의 차세대 혁신. 최대 184 MHz의 확장된 스위칭 대역폭. 1개의 고정 채널 뱅크와 1개의 가변 채널 뱅크. 최대한의 간섭 회피를 가능하게 하는 "저 상호변조 모드(Low Intermodulation Mode)." 매우 견고한 하우징.

SKM 5200-II 는 세계적으로 유명한 SKM 5200 마이크의 후속 모델입니다. 튼튼하고 조작이 간단한 이 송신기는 모든 종류의 녹음 또는 통신 환경에 최적입니다. 최첨단 기술과 조작 편의성으로 라이브 무대에서 뛰어난 성능을 발휘하도록 설계되었습니다.

SKM-II 5200는 전환가능한 대역폭을 184 MHz까지 제공합니다. Sennheiser의 HiDyn plus™ 잡음 제거 시스템은 RF 잡음을 최소한으로 감소시켜주어 맑고 깨끗한 사운드를 보장합니다.

SKM-II 5200 송신기는 고정된 뱅크 및 다양한 채널 뱅크를 모두 가지고 있어 프로그램이 매우 광범위합니다. 모든 제어 과정은 백라이트 LCD에 바로 표시되며, 원치 않는 변경을 방지하기 위한 잠금기능이 있습니다.

SKM 5200-II 모델은 4개의 주파수 변형( L, N, N-US, P)으로 이용이 가능하며, 블랙, 니켈, 스틸 파랑(적철광)의 3가지 색으로 출시됩니다. 휴대형 송신기는 Neumann 마이크 헤드뿐만 아니라 모든 종류의 캡슐, 5000 시리즈의 배터리 및 재충전 가능한 배터리와도 호환이 가능합니다.

  • 184 MHz까지 확장된 대역폭,

  • 낮은 왜곡율 (Lol),

  • 출력 전원 스위치,

  • 수상 경력이 있는 디자인,

  • 1 dB 폭으로 조정 가능한 감도 (-40~0 dB)

  • 최소 7시간 사용 시간 보장하는 AA 배터리 2개 포함,

  • 주파수 5 kHz 간격으로 조정가능,

  • 편리한 조그 다이얼,

  • 전환가능한 로우-컷

Pro Talk Video Series

Pro Talk Video Series

World-renowned Sound Engineers sharing tips, tricks and stories.
Subscribe and do not miss any episode of our Pro Talk Video Series
on YouTube! more

Newsletter subscription

Be the first to write a review.


Product Support Phone

Product Phone

  • What are the operating frequency ranges of the different wireless microphone systems?

  • What do I do when there is "noise" in the wireless system?

    It is likely that the noise/static/interference you’re experiencing is being caused by a background RF signal from an external source (ie: broadcast TV or radio stations, other wireless microphones, etc) on the same frequency as your wireless system.

    This can be confirmed this by turning off the transmitter and checking the receiver’s display. If there is an RF signal showing on the receiver's display when the transmitter is off that indicates that the receiver is picking up an RF signal from an external source and the receiver is trying to tune this external RF signal which will sound like a broad white noise.

    One of the most important steps for proper setup is turning on the receiver first and checking what it sees in the absence of your microphone signal. If the receiver sees an RF signal being generated by an outside source (ie: noise) then you need to retune the system. Depending on which system is being used the exact steps on how to change frequencies will vary. NOTE: When using multiple wireless systems the frequencies need to be co-ordinated together to ensure that they do not interfere with each other.

    Once a new frequency is selected get back to the receiver's main display. If there is no RF registering then this new frequency is a "clean" frequency on which to operate.

    Keep in mind the RF environment changes from location to location so it is important to always check the receiver for RF levels before turning on the transmitter. It is best practice to always do a frequency scan when using equipment in a new location.

    The RF environment is often constantly changing so a frequency scan is really only completely accurate for the exact time that the frequency scan is done (ie: a frequency scan done on Wednesday night could yield different results to a frequency scan done on Sunday morning). Ultimately to ensure a frequency scan is still valid you want to turn on the receivers and leave the microphones off. In this state the receivers should be showing no RF signal to indicate that they are on a clean usable frequency. If you turn on the receivers (with the microphones off) and you are seeing a lot of RF activity that indicates that something in the RF environment has changed and now the frequency which was previously "clean" (and hence usable) is now "dirty" (ie there is an external RF signal on it) and you will need to set the receiver to use a different frequency.

  • What frequency can I use outside of the United States?

    There are no universal rules which govern the use of wireless microphone equipment globally. The rules and regulations regarding which frequencies are allowed for wireless microphones vary widely by country. All Sennheiser products that are sold in the US are congruent to the US rules and regulations as mandated by the FCC.

    We can provide information regarding rules and regulations for the US, however because rules and regulations vary from country to country, we cannot advise which frequencies to use outside of the US. Unfortunately there is no universal database that contains all this information. 

    For information about the rules and regulations for a specific country it is recommended that you directly contact the embassy of the country in question to find out the rules and regulations or contact the Sennheiser subsidiary or partner company in the country in question.  You can find contact details for these subsidiaries and partner companies here: (

  • Why is it illegal to use wireless microphones in the 700 MHz range in the USA?

    In June 2010 the FCC instituted regulations that made it illegal to operate wireless microphones within the 700 MHz frequency range in the United States.

    With the transition to digital television TV broadcasters vacated a large section of the UHF spectrum (from 698 to 806 MHz) so the FCC auctioned the 700 MHz band to the highest bidders (including AT&T and Qualcomm) to facilitate the development of wireless broadband Internet service throughout the United States. In addition, the FCC has reserved select frequencies in the 700 MHz band for emergency and national security purposes.

    NOTE: The FCC is the Government agency tasked to regulate interstate communications by radio, television, wire, satellite, and cable in all 50 states, the District of Columbia and U.S. territories. The FCC sets the guidelines and regulations for all broadcast equipment (including wireless microphones).


  • 사용 설명서
    • Instruction manual SKM 5200-II (3 MB) Download

  • EU Declaration of Conformity
    • EU Declaration of Conformity SKM 5200-II (650 KB) Download

  • 펌웨어 업데이트
    • Sennheiser Firmware EM 373x Version 2.2.0 incl. SK 5212-II/SKM 5200-II Version 3.1.0 (530 KB) Download

  • Frequency Sheets
    • Frequency tables SKM 5200-II (180 KB) Download

      Frequency tables SKM 5200-II for frequency range P, L and N

  • 소프트웨어
    • Sennheiser Transmitter Manager - Version 4.1 - Windows (3.6 MB) Download

  • 안전 지침 및 규정 정보
    • Supplementary Information SK 5212-II/SKM 5200-II (2.1 MB) Download

    • 안전 지침 SK 5212-II/SKM 5200-II (800 KB) Download

  • Release Notes
    • Release Notes - Sennheiser Transmitter Manager Version 4.1 (110 KB) Download