무선 헤드폰 헤드셋 블루투스®

PXC 550 Wireless

이제까지의 수많은 여행, PXC 550 Wireless와 함께하는 여행과는 비교할 수 없습니다. PXC 550 Wireless는 이동 중에도 지속적인 연결을 제공하며 편안함을 유지시켜주는 최고의 여행 동반자입니다.
559,000
무료 배송. 세금 포함.
제품 번호 506514
OUT OF STOCK

퍼스트 클래스로 떠나는 여행

여행 중에 한층 더 풍성하고 몰입적인 사운드트랙을 경험하십시오. PXC 550 Wireless는 70년 이상 오디오 업계를 선도해온 젠하이저가 개발한 제품으로 타협 없는 최고의 음질을 제공합니다. 그 어떤 볼륨에서도 깊고 또렷하며 강력하게 본래의 고유한 소리를 전달합니다. PXC 550 Wireless는 남다른 고품격 성능으로 가장 좋아하는 앨범이나 영화에 생기를 불어넣어 줍니다.

널리 인정받는 젠하이저의 사운드 시그니처를 고성능 여행용 헤드셋으로 경험해보십시오.

  • 블루투스
  • 무선 / 선이 없는
  • 액티브 노이즈 캔슬링 (NoiseGard 기술)
  • 마이크로폰 탑재 (헤드셋)

나만의 오디오 라운지를 누리십시오

이 세상에는 많은 소음이 존재합니다. PXC 550 Wireless로 모든 소음을 차단하십시오. 젠하이저의 적응형 노이즈 제거 기술인 NoiseGard® Hybrid는 가장 소란한 환경에서도 나만의 소리 공간을 만들어 줍니다. 주변 소음이 커질수록 더 강력하게 제거되어 가장 편안한 청취 경험을 가능하게 해줍니다. 최대 30*시간까지 지속되는 탁월한 배터리 수명 덕분에 단 한번의 충전만으로도 나만의 오디오 라운지를 벗어나지 않고 지구를 한 바퀴 돌 수 있습니다.

탁월한 선택: 이동의 자유로움

여행도 음악도 자유롭게 움직일 수 있을 때 가장 잘 경험할 수 있습니다. PXC 550 Wireless는 바로 그런 경험을 가능하게 해줍니다. 최상의 음질을 전송하는 최첨단 방식을 제공하며, 케이블이 아니라 근거리무선통신(Near Field Communication) 기술로 헤드셋을 연결합니다. PXC 550 Wireless를 각 휴대기기에 페어링하는 것 또한 청취하는 것만큼이나 즐거운 일입니다. 물론 PXC 550 Wireless에 포함된 케이블로도 연결이 가능합니다.

커뮤니케이션 센터의 직관적인 제어

PXC 550 Wireless는 개인적인 통화 또는 비즈니스 통화 시 탁월한 선명함을 제공합니다. 주변 소음을 감지하고 필터링해줌으로 소란한 환경속에서도 상대방에게 확실하게 의사전달을 할 수 있게 해줍니다. 이어컵에 커뮤니케이션 센터를 실행하기 위한 터치 트랙패드가 설치되어 있어 자연스럽고 직관적인 사운드 조절이 가능합니다.

편안함의 형상을 느껴보십시오

초경량 PXC 550 Wireless는 오랫동안 청취하고 편리하게 휴대할 수 있도록 설계되었습니다. 최고의 착용감을 보장하기 위해 수많은 사람들의 귀를 측정하여 그에 따른 전반적인 사이즈를 고려하고 특별한 형태의 이어패드와 헤드밴드 구조로 헤드셋을 디자인하였습니다. 또한 프레임은 납작하게 접을 수가 있어서 스타일리시한 소형 여행용 케이스에 깔끔하게 보관할 수 있습니다. 탁월한 편안함과 최고의 디자인 모두 갖추었습니다.

#pxc550

 

기술 자료

  • 착용 유형
    Headband
  • 임피던스
    Active 490 Ω / Passive 46 Ω
  • 주파수 응답 (헤드폰)
    17 - 23,000 Hz
  • 블루투스 버전
    Bluetooth 4.2
  • 지원 프로파일
    Headset Profile (HSP) v.1.2 / Handsfree Profile (HFP) v.1.6 / Advanced Audio Distribution Profile (A2DP) v.1.3 / Device ID Profile (DIP) v.1.3
  • 음압레벨(SPL)
    110 dB
  • THD, 총 왜곡율
    <0.5% (1kH, 100dB)
  • 접촉 압력
    3 N
  • 이어 커플링
    Circumaural
  • 트랜스듀서 원리
    Dynamic closed
  • 충전 시간
    3 hours (full charge)
  • 픽업 패턴
    3-Mic Beamforming Array
  • 작동 시간
    Up to 30 hours
  • 케이블 제외한 무게
    227g

FAQ

  • What does "Circumaural" mean?

    CIRCUMAURAL headphones (sometimes referred to as "Around Ear" headphones) encircle the ear creating a seal thereby effectively reducing ambient noise from getting to the ear. This is known as passive noise reduction.
    This type of headphone is most effective in a high noise environment where it's necessary to eliminate as much of the environmental noise as possible for effective communication.



    PXC 550 Wireless ( #506514 )
  • How do I get the best transmission range out of my wireless headphones?

    While the overall transmission range for wireless headphones is mostly determined by the wireless technology being utilized by the individual wireless headphone product there are multiple external factors (like obstacles, audio signal strength, wireless signal congestion, etc) that can effect the wireless signal transmission range of wireless headphones.

    Obstacles are one of the main factors that can effect the transmission range of the wireless signal. While the wireless signal (with the exception of infrared signals) can pass through obstacles (like walls) ultimately range will be affected (likely reduced) by passing through these obstacles and the more dense the obstacle the greater the effect will be on the signal. For example a signal passing through a glass window won't be affected very much whereas a signal passing through a concrete wall will be effected much more greatly. Having a clear line of sight does provide the best transmission range.

    The audio signal being output by your audio source to the transmitter of the headphones is another key factor in transmission range. A weaker audio signal going into the transmitter means the transmitter has a weaker signal to work with which can in turn reduce the transmission strength which ultimately affects range. Ensure that your audio source is outputting the best possible signal for the transmitter to use.



    PXC 550 Wireless ( #506514 )
  • What is A2DP and what does it do?

    A2DP (Advanced Audio Distribution Profile) is a Bluetooth profile that defines how multimedia audio can be streamed from one device to another over a Bluetooth connection.

    Most Sennheiser Bluetooth headphones utilize the A2DP profile as it allows for the best audio transmission over Bluetooth hence providing the best audio in the headphones.

    NOTE: If the device you are connecting to does not support A2DP there may be connectivity issues between the Sennheiser unit and the device. In situations like this most Bluetooth Chipset manufacturers offer firmware updates to the Bluetooth chip to allow the A2DP profile to be utilized.



    PXC 550 Wireless ( #506514 )
  • What is Active Noise Cancelling?

    Noise cancelling headphones work by identifying the frequencies of noise outside the headphones and creating the exact opposite frequencies. The two sets of frequencies cancel each other out so the brain thinks that no noise is present.

    As this happens there will always be a very low "white noise" effect. This low level "white noise" is considered to be silent because most people are used to having back ground noise present in everyday life so often don't even realize that this "white noise" is present. If your hearing is very attuned you may be more aware of this "white noise" however if audio is present in the headphones then the "white noise" is completely covered over and usually not detected by the human ear.

    Please check out this video (http://www.youtube.com/watch?v=1EwkaRvIduw) which will show some of our Noise Cancelling models in action. The model shown may be different but the concept is the same.

    NOTE: Noise cancelling is most effective for repetitive low level frequencies (like engine noise) but will not block higher level frequencies (like people talking) as much as these frequencies are needed to allow sound to work in the headphones.



    PXC 550 Wireless ( #506514 )
  • How do I know if the wireless headphones will work on my audio device?

    Our Wireless Headphone Systems can be connected into virtually any audio device and it is just a matter of identifying the appropriate audio output port and then having the appropriate connecting plug or component.

    The type of connector you have available will depend on the Sennheiser Wireless Headphone System that you choose. The type of audio output that you will have available to connect into will depend on the audio device you are connecting to. 

    Typical audio output ports include:

    - 3.5mm headphone port
    - red and white RCA audio output ports
    - digital audio output (either optical or coaxial)

    NOTE: In some instances an adapter or extra component will be needed to make the appropriate connection.

    For example to change a 3.5mm headphone plug to an RCA connection you would use a female 3.5mm to male RCA adapter.

    For example to change an analog connection (3.5mm headphone plug or red and white RCA plugs) to a digital connection (ie: optical) you would use a digital to analog decoder (like the OREI DA 34).



    PXC 550 Wireless ( #506514 )
  • What do I do when there is wireless signal (or WiFi) interference?

    The wireless headphones that utilize a digital transmission signal operate in the unlicensed 2.4 Ghz range as do many other wireless devices (like WiFi routers, wireless printers, etc) and the headphones have a specific frequency range on which they can operate. The headphones scan the local wireless signal environment and then automatically select an unused frequency within their designated range. The headphones are designed to work in conjunction with other wireless devices without the different devices interfering with each other.

    Typically the bandwidth of the WiFi router is greater than that of the headphones and it actually encompasses the bandwidth that the headphones want to use. Most of the time the two signals are away from each other and there is no issue. Occasionally if the WiFi router has established it's signal in the bandwidth that the headphones want to use then the two signals butt up against each other this can cause issues. Sometimes it is possible to change the WiFi router frequency manually by using a switch on the router itself.

    In situations where the WiFi router cannot be changed manually the simple solution is to turn off the headphones and the WiFi router. Start the headphones and let them run for 15 minutes to establish their signal and then turn on the WiFi router. The WiFi router will "see" the signal of the headphones and establish it's own signal in a different part of the bandwidth and the two devices will work without interfering with each other. NOTE: Once this process has been done the signals are established and will remain established even with a device is turned off.

    If the above solution does not resolve the issue it may be a situation where the wireless environment is too crowded and the multiple wireless signals keep butting up against each other and causing issues. To resolve this some wireless signals would need to be removed from the environment (ie: turned off). For example if a wireless printer was turned on it is creating wireless signal that would be part of the wireless signal congestion. If the printer is not used all the time then it could be turned off to reduce the congestion and allow the other wireless devices (like the headphones) to work.



    PXC 550 Wireless ( #506514 )
  • What is the difference between "open" and "closed" ear cups?

    An open (sometimes referred to as "open aire" headphone avoids adverse resonating effects in the earcup thus offering best possible sound reproduction with the utmost in transparency.  The trade-off is that at extreme volumes some sound will leak out.

     

    A closed headphone isolates you from your environment and vice-versa (ie: the sound is contained within the headphones). This is perfect for critical listening or a situation where you do not want to disturb/be disturbed. Our "closed" wireless headphone models include the MOMENTUM, PXC 550, HD 4.50/4.40 and Urbanite XL. A typical open headphone is the Sennheiser HD 600, 650 or 800.

     

    With Sennheiser headphones the audio will always be accurate and responsive and is sure to please no matter what situation you need headphones for so it is personal preference as to whether "open" or "closed" headphones are used.



    PXC 550 Wireless ( #506514 )
  • What is NoiseGard™?

    Flying can be particularly tiring, as passengers on board of a plane are often exposed to a continuous noise level of up to 80 dB/SPL. And on board of a train it can sometimes become loud as well. Sennheiser's patented NoiseGard™ technology makes travelling as relaxed as possible by letting you enjoy music in peace. The innovative NoiseGard™ /digital system now offers travelers a choice of three noise-cancelling profiles – optimized for the different types of surrounding noise encountered while travelling.

     

    Active noise cancellation: the idea is based on the physical principle of noise and anti-noise, which was researched for the first time by the physicist Paul Lueg in the early 1930s. Put simply, an artificially generated sound field that is phase-inverted to the sound field of the noise has the effect of cancelling out the unwanted noise. Sennheiser’s NoiseGard™ technology works as follows: miniature microphones integrated into the headphones pick up the low-frequency noise close to the ears. Sophisticated electronic circuitry calculates a sound wave that is phase-inverted by 180 degrees to the unwanted noise. Directly at the ear, the noise and anti-noise cancel each other out almost completely. As a result, particularly annoying low-frequency noise is dramatically reduced.

     



    PXC 550 Wireless ( #506514 )
  • What means NFC™ Near Field Communication?

    Near-field communication (NFC) is a set of communication protocols that enable two electronic devices, one of which is usually a portable device such as a smartphone, to establish communication by bringing them within 4 cm (1.6 in) of each other.

     

    NFC devices are used in contactless payment systems, similar to those used in credit cards and electronic ticket smartcards and allow mobile payment to replace/supplement these systems. NFC-enabled devices can act as electronic identity documents and keycards. NFC offers a low-speed connection with simple setup that can be used to bootstrap more capable wireless connections.



    PXC 550 Wireless ( #506514 )
  • What are the basic differences between the different wireless headphone models?

    Sennheiser offers a range of wireless headset options that utilize a variety of audio transmission signals (including Radio Frequency and Digital Audio Signals) and both on ear and around the ear models to suit different wearing preferences.

    These wireless headphone systems can be connected via a 3.5 mm plug into a dedicated headphone jack (which will often cut sound to the external speakers) OR to the RED & WHITE RCA audio output jacks (often found on the back of the TV, cable box, receiver, DVR, etc.) and when connected in this manner they will allow for operation of both the headphones and the external speakers. All models offer unique functions yet will be able to provide an excellent listening experience and personal preference will play a large part in selection.

    Our range of wireless headphones can be seen on our website (http://en-us.sennheiser.com/wireless-tv-headphones).



    PXC 550 Wireless ( #506514 )
  • Can I listen to a TV with Bluetooth headphones?

    We do NOT recommend Bluetooth headsets for applications like TV watching as the latency (time it takes for a Bluetooth signal to be transmitted) that is inherent to all Bluetooth devices causes the audio to be out of sync with the video.



    PXC 550 Wireless ( #506514 )

다운로드

  • Instruction Manual
  • 퀵 가이드
  • 안전 가이드
  • EC DOC(준수성 선언)
    • EC Declaration of Conformity.pdf (130 KB) Download

* Up to 30 hours when connecting the headphones via cable and engaging noise cancellation. Around 20 hours when connecting the headphones via Bluetooth and engaging noise cancellation. The exact operating time is influenced by factors such as the audio and background noise volume.