iF design award 2017 award logo
무선 헤드폰 블루투스

HD 4.50 BTNC

새로운 젠하이저 HD 4.50 BTNC 클로즈백 헤드셋은 활동적인 음악 애호가들이 바라는 모든 것을 제공합니다. 놀라우리만치 섬세하고 강력한 사운드, 최신 무선 기술, 직관적인 사용, 고품질 소재로 만들어져 견고하면서도 우아하고 간결한 디자인. 그러나 가장 큰 혜택은 젠하이저의 능동형 소음 감소 기술 NoiseGard™가 적용되어 어디에서나 평화롭게 음악에 심취할 수 있게 해준다는 사실입니다.
279,000
228,000
무료 배송. 세금 포함.
제품 번호 506783

젠하이저 HD 4 시리즈 - 한 차원 높아진 사운드

어디서나 즐기십시오. - 다재다능하며 생동감 넘치는 새로운 HD 4 시리즈는 완전한 젠하이저 품질을 견고한 클로즈백 오버이어 헤드셋으로 제공하여 일상적인 청취 니즈를 충족해줍니다.

전설적인 젠하이저의 사운드를 일상생활의 일부로 받아들여, 삶을 더욱 풍요롭게 만드십시오.

HD 4.50 BTNC

이 새로운 헤드셋은 단지 이동 중에 음악을 감상할 수 있는 것 뿐 아니라 장소에 상관 없이 음악을 맘껏 즐길 수 있길 원하는 까다로운 청취자들의 요구사항을 반영해 설계되었습니다. 나와 음악 사이를 가로막는 모든 것을 잠재워주는 NoiseGard™ 능동형 소음 제거의 역량 덕분에 HD 4.50 BTNC는 젠하이저의 탁월한 사운드만을 전달합니다.

누구의 방해도 받지 않고 무선으로 음악을 자유롭게 만끽하십시오. 어디서나 언제나

내 귀에 들리는 것은 오직 음악 뿐

HD 4.50 BTNC를 통해 음악이 지닌 진정한 사운드를 즐길 수 있습니다. 다른 건 없습니다. 젠하이저가 개발한 능동형 소음 제거 기술 NoiseGard™를 통해 소란한 주변 세상이 효과적으로 차단됩니다. 이제 이 우수한 클로즈백 헤드셋이 재생해주는 정교한 사운드에 빠져들 수 있습니다. 젠하이저만의 고유한 드라이버를 통해 풍부한 디테일, 생생하고 강력한 베이스가 전달됩니다.

내 귀에 들리는 것은 오직 음악 뿐

아무런 제약 없이 탁월한 사운드만 있을 뿐입니다.

HD 4.50 BTNC는 자유로움을 의미합니다. 음악적인 자유로움 그리고 이동의 자유로움 거추장스러운 케이블은 없습니다. 이 헤드셋에는 젠하이저 품질의 스피커를 완벽하게 보완하기 위해 최첨단 무선 기술과 오디오 코덱이 내장되어, 안정적인 전송과 진정한 무선 하이파이 사운드가 제공됩니다. 근거리 무선 통신(NFC)을 통해 호환 장치에 즉각적으로 간단하게 페어링이 됩니다.

아무런 제약 없이 탁월한 사운드만 있을 뿐입니다.

직관적인 사용

HD 4.50 BTNC의 모든 것은 철저한 계획에 의해 만들어졌습니다. 이어컵 위에 장착된 직관적인 컨트롤에 손가락을 대보면 그게 무슨 의미인지 곧 알게 되실 겁니다. 통합 마이크를 통해 간단하게 전화를 걸거나 받고, 음악의 트랙을 변경하며, 볼륨을 조절할 수 있습니다.

직관적인 사용

장소에 상관 없는 편안함

HD 4.50 BTNC에는 최고의 편안함과 최상의 휴대성이 결합되었습니다. 어라운드 이어 디자인과 인체공학적으로 설계된 이어패드는 장시간 청취 시에도 편안함을 보장해줍니다. 견고한 접이식 헤드밴드는 함께 제공되는 보호 케이스에 간단하게 접어 보관이 가능합니다.

장소에 상관 없는 편안함

오래 지속되는 배터리가 주는 또 다른 즐거움

장시간 외출 시에도 충전 걱정이 필요하지 않습니다. HD 4.50 BTNC 는 NoiseGard™로 보호되는 음악을 최대 19시간 동안 청취할 수 있습니다. (NoiseGard™ 스위치가 꺼진 경우 최대 25시간 지속)

오래 지속되는 배터리가 주는 또 다른 즐거움

탁월함과 간결함의 극대화

HD 4.50 BTNC와 같은 프리미엄 헤드셋을 개발할 때, 잠깐 유행하고 지나가는 스타일은 옵션이 될 수 없습니다. 젠하이저는 고품질 소재의 세련된 프레임을 선택했습니다. 시간이 흘러도 변함 없는 품격 앞으로 오랜 시간 사용하는 즐거움뿐 아니라 보는 즐거움까지 고려했습니다.

탁월함과 간결함의 극대화

구성품 보기

  • HD 4.50 BTNC Headphones
  • Carry Case
  • Audio cable with 2.5 mm and 3.5 mm jack plug
  • USB charging cable with micro-USB connector
  • Quick guide
  • Safety guide

기술 자료

  • 임피던스
    18 Ω
  • 주파수 응답 (마이크로폰)
    100 - 10,000 Hz
  • 주파수 응답
    18 - 22,000 Hz
  • 음압레벨(SPL)
    113dB (Passive: 1kHz/1Vrms)
  • THD, 총 왜곡율
    <0.5% (1kHz/100dB)
  • 픽업 패턴
    Dual omnidirectional microphones
  • 배터리 사양
    Li-ion Polymer Battery
  • 코덱
    AptX

FAQ

  • What does "Circumaural" mean?

    CIRCUMAURAL headphones (sometimes referred to as "Around Ear" headphones) encircle the ear creating a seal thereby effectively reducing ambient noise from getting to the ear. This is known as passive noise reduction.
    This type of headphone is most effective in a high noise environment where it's necessary to eliminate as much of the environmental noise as possible for effective communication.



    HD 4.50 BTNC ( #506783 )
  • How do I get the best transmission range out of my wireless headphones?

    While the overall transmission range for wireless headphones is mostly determined by the wireless technology being utilized by the individual wireless headphone product there are multiple external factors (like obstacles, audio signal strength, wireless signal congestion, etc) that can effect the wireless signal transmission range of wireless headphones.

    Obstacles are one of the main factors that can effect the transmission range of the wireless signal. While the wireless signal (with the exception of infrared signals) can pass through obstacles (like walls) ultimately range will be affected (likely reduced) by passing through these obstacles and the more dense the obstacle the greater the effect will be on the signal. For example a signal passing through a glass window won't be affected very much whereas a signal passing through a concrete wall will be effected much more greatly. Having a clear line of sight does provide the best transmission range.

    The audio signal being output by your audio source to the transmitter of the headphones is another key factor in transmission range. A weaker audio signal going into the transmitter means the transmitter has a weaker signal to work with which can in turn reduce the transmission strength which ultimately affects range. Ensure that your audio source is outputting the best possible signal for the transmitter to use.



    HD 4.50 BTNC ( #506783 )
  • What is A2DP and what does it do?

    A2DP (Advanced Audio Distribution Profile) is a Bluetooth profile that defines how multimedia audio can be streamed from one device to another over a Bluetooth connection.

    Most Sennheiser Bluetooth headphones utilize the A2DP profile as it allows for the best audio transmission over Bluetooth hence providing the best audio in the headphones.

    NOTE: If the device you are connecting to does not support A2DP there may be connectivity issues between the Sennheiser unit and the device. In situations like this most Bluetooth Chipset manufacturers offer firmware updates to the Bluetooth chip to allow the A2DP profile to be utilized.



    HD 4.50 BTNC ( #506783 )
  • What is Apt-X and what does it do?

    The Apt-X refers to a built in codec that takes the available Bluetooth audio and enhances it so you have a superior sound. In order for the Apt-X codec to be utilized both the headphones and the device that they are connected to need to have the Apt-X codec built in.

    If the codec is not available in the device you are connected to the headphones will still work however you will not have the benefit of the Apt-X codec. If a device does not have the Apt-X codec built in you can purchase a device called a Bluetooth dongle with the Apt-X codec that will connect to your device and allow you to utilize the codec.

    NOTE: Apt-X will not affect Bluetooth connectivity with a device.



    HD 4.50 BTNC ( #506783 )
  • How do I know if the wireless headphones will work on my audio device?

    Our Wireless Headphone Systems can be connected into virtually any audio device and it is just a matter of identifying the appropriate audio output port and then having the appropriate connecting plug or component.

    The type of connector you have available will depend on the Sennheiser Wireless Headphone System that you choose. The type of audio output that you will have available to connect into will depend on the audio device you are connecting to. 

    Typical audio output ports include:

    - 3.5mm headphone port
    - red and white RCA audio output ports
    - digital audio output (either optical or coaxial)

    NOTE: In some instances an adapter or extra component will be needed to make the appropriate connection.

    For example to change a 3.5mm headphone plug to an RCA connection you would use a female 3.5mm to male RCA adapter.

    For example to change an analog connection (3.5mm headphone plug or red and white RCA plugs) to a digital connection (ie: optical) you would use a digital to analog decoder (like the OREI DA 34).



    HD 4.50 BTNC ( #506783 )
  • What do I do when there is wireless signal (or WiFi) interference?

    The wireless headphones that utilize a digital transmission signal operate in the unlicensed 2.4 Ghz range as do many other wireless devices (like WiFi routers, wireless printers, etc) and the headphones have a specific frequency range on which they can operate. The headphones scan the local wireless signal environment and then automatically select an unused frequency within their designated range. The headphones are designed to work in conjunction with other wireless devices without the different devices interfering with each other.

    Typically the bandwidth of the WiFi router is greater than that of the headphones and it actually encompasses the bandwidth that the headphones want to use. Most of the time the two signals are away from each other and there is no issue. Occasionally if the WiFi router has established it's signal in the bandwidth that the headphones want to use then the two signals butt up against each other this can cause issues. Sometimes it is possible to change the WiFi router frequency manually by using a switch on the router itself.

    In situations where the WiFi router cannot be changed manually the simple solution is to turn off the headphones and the WiFi router. Start the headphones and let them run for 15 minutes to establish their signal and then turn on the WiFi router. The WiFi router will "see" the signal of the headphones and establish it's own signal in a different part of the bandwidth and the two devices will work without interfering with each other. NOTE: Once this process has been done the signals are established and will remain established even with a device is turned off.

    If the above solution does not resolve the issue it may be a situation where the wireless environment is too crowded and the multiple wireless signals keep butting up against each other and causing issues. To resolve this some wireless signals would need to be removed from the environment (ie: turned off). For example if a wireless printer was turned on it is creating wireless signal that would be part of the wireless signal congestion. If the printer is not used all the time then it could be turned off to reduce the congestion and allow the other wireless devices (like the headphones) to work.



    HD 4.50 BTNC ( #506783 )
  • What is the difference between "open" and "closed" ear cups?

    An open (sometimes referred to as "open aire" headphone avoids adverse resonating effects in the earcup thus offering best possible sound reproduction with the utmost in transparency.  The trade-off is that at extreme volumes some sound will leak out.

     

    A closed headphone isolates you from your environment and vice-versa (ie: the sound is contained within the headphones). This is perfect for critical listening or a situation where you do not want to disturb/be disturbed. Our "closed" wireless headphone models include the MOMENTUM, PXC 550, HD 4.50/4.40 and Urbanite XL. A typical open headphone is the Sennheiser HD 600, 650 or 800.

     

    With Sennheiser headphones the audio will always be accurate and responsive and is sure to please no matter what situation you need headphones for so it is personal preference as to whether "open" or "closed" headphones are used.



    HD 4.50 BTNC ( #506783 )
  • What is NoiseGard™?

    Flying can be particularly tiring, as passengers on board of a plane are often exposed to a continuous noise level of up to 80 dB/SPL. And on board of a train it can sometimes become loud as well. Sennheiser's patented NoiseGard™ technology makes travelling as relaxed as possible by letting you enjoy music in peace. The innovative NoiseGard™ /digital system now offers travelers a choice of three noise-cancelling profiles – optimized for the different types of surrounding noise encountered while travelling.

     

    Active noise cancellation: the idea is based on the physical principle of noise and anti-noise, which was researched for the first time by the physicist Paul Lueg in the early 1930s. Put simply, an artificially generated sound field that is phase-inverted to the sound field of the noise has the effect of cancelling out the unwanted noise. Sennheiser’s NoiseGard™ technology works as follows: miniature microphones integrated into the headphones pick up the low-frequency noise close to the ears. Sophisticated electronic circuitry calculates a sound wave that is phase-inverted by 180 degrees to the unwanted noise. Directly at the ear, the noise and anti-noise cancel each other out almost completely. As a result, particularly annoying low-frequency noise is dramatically reduced.

     



    HD 4.50 BTNC ( #506783 )
  • What means NFC™ Near Field Communication?

    Near-field communication (NFC) is a set of communication protocols that enable two electronic devices, one of which is usually a portable device such as a smartphone, to establish communication by bringing them within 4 cm (1.6 in) of each other.

     

    NFC devices are used in contactless payment systems, similar to those used in credit cards and electronic ticket smartcards and allow mobile payment to replace/supplement these systems. NFC-enabled devices can act as electronic identity documents and keycards. NFC offers a low-speed connection with simple setup that can be used to bootstrap more capable wireless connections.



    HD 4.50 BTNC ( #506783 )
  • What are the basic differences between the different wireless headphone models?

    Sennheiser offers a range of wireless headset options that utilize a variety of audio transmission signals (including Radio Frequency and Digital Audio Signals) and both on ear and around the ear models to suit different wearing preferences.

    These wireless headphone systems can be connected via a 3.5 mm plug into a dedicated headphone jack (which will often cut sound to the external speakers) OR to the RED & WHITE RCA audio output jacks (often found on the back of the TV, cable box, receiver, DVR, etc.) and when connected in this manner they will allow for operation of both the headphones and the external speakers. All models offer unique functions yet will be able to provide an excellent listening experience and personal preference will play a large part in selection.

    Our range of wireless headphones can be seen on our website (http://en-us.sennheiser.com/wireless-tv-headphones).



    HD 4.50 BTNC ( #506783 )
  • Can I listen to a TV with Bluetooth headphones?

    We do NOT recommend Bluetooth headsets for applications like TV watching as the latency (time it takes for a Bluetooth signal to be transmitted) that is inherent to all Bluetooth devices causes the audio to be out of sync with the video.



    HD 4.50 BTNC ( #506783 )

다운로드

  • Instruction Manual
  • 퀵 가이드
  • 안전 가이드
  • EC DOC(준수성 선언)
    • EC Declaration of Conformity HD 4._series.pdf (120 KB) Download